Lasermax LMS-UNI-MAX GREEN Bedienungsanleitung PDF herunterladen

For: UNI–RED, UNI–GREEN, and UNI–IR

Installing the Laser System

Changing the Batteries

Installation Guide

What’s in the Box

A Laser Housing

B Battery Cover

C Clamping Screw

D Phillips Head Screws

E Batteries 357 (2) or 1/3N (2)

F Adjustment Tool

G Activation Switch

1 | Remove the magazine from your

ﬁrearm and clear the chamber.

Check if your gun is unloaded.

2 | Check again!

3 | Slightly loosen the clamping

screw on the laser housing

to open the rail grips.

DO NOT REMOVE CLAMPING

SCREW. Mount the laser on the

rail of your ﬁrearm, making sure

the rail grips on the laser unit are

ﬁrmly set into the grooves on the

rail and the clamping screw is in

line with the notch in your rail

(ﬁgure A).

4 | Tighten the clamping screw with

the ﬁngers to ensure a secure

ﬁt (ﬁgure B). Further tighten the

clamping screw with a

screwdriver or coin until the laser

is ﬁrmly attached (ﬁgure C).

5 | Turn on the laser by pressing in

on the activation switch from the

right or left side. The center

position is o.

6 | Follow the manufacturer’s

instructions to attach your choice

of additional accessories onto

the Integrated Picatinny Rail

(ﬁgure D).

1 | Unscrew and remove

both phillips head screws from

battery cover.

2 | Remove battery cover from laser

housing and insert batteries into

unit as shown.

3 | Put battery cover back in place

on laser housing, making sure

the lip on the cover ﬁrst engages

the slot in the laser housing.

4 | Install and tighten both Phillips

head screws into battery cover.

Do not overtighten.

TIMEOUT!

To avoid unintentional

battery drain, the laser is set

to automatically turn o after

10 minutes. When timed out,

simply cycle the activation

switch to refresh the laser and

turn it back on!

Spare Parts List

LMS–UNI–RG Removable rail grip

LMS–UNI–CS Clamping screw

LMS–UNI–AS Activation switch

LMS–2X357 or LMS–2X13N Batteries: 357 (2) or 1/3N (2)

LMS–AT50 Adjustment tool

Accessories

LMS–UNI–MAS–6 Momentary Activation Switch 6” cord

LMS–UNI–MAS–10 Momentary Activation Switch 10” cord

LMS–ADP–SIGMA Rail adapter for S&W Sigma series

LMS–ADP–SHOTGUN Rail adapter for 1” shotgun mag tube

LMS–HKADP–C Rail adapter for H&K USP compact

LMS–HKADP–F Rail adapter for H&K USP full size

LMS–ADP–AR Rail adapter for Black Riﬂes

Changing the Laser Mode

Turn the laser on for at least two seconds, then turn it o. Next,

turn the laser on and o three times from the same side while

stopping at the center position while turning o (each on/o cycle

should take less than half of a second).When the laser is turned on,

the mode will have changed. To return the laser to the previous

mode, repeat the process.

01785-0-51

Disclaimer

Export of LaserMax IR Lasers is strictly prohibited without a valid export license

issued by the U.S. Department of State Oce of Defense Trade Controls, in

accordance with International Trac in Arms (ITAR), Title 22, Code of Federal

Regulations Part 120-130. Transfer to a foreign person is considered

an export even if done within the US. For further information contact

the Oce of Defense Trade Control @ (202) 663-1282.

1 2

Installation Guide 1

Inhaltsverzeichnis

Seite 1 - Installation Guide

For: UNI–RED, UNI–GREEN, and UNI–IRInstalling the Laser SystemChanging the BatteriesInstallation Guide What’s in the BoxA Laser HousingB Battery

Seite 2

For Riﬂe Pack Owners:Aligning the Laser Limited Warranty1 | To sight in your laser, insert the adjustment tool into one of the small alignment

Verwandte Modelle: LMS-UNI-ESSENTIAL SERIES

Kommentare zu diesen Handbüchern

Keine Kommentare

Lasermax LMS-UNI-MAX GREEN Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Optik Lasermax LMS-UNI-MAX GREEN herunter. LaserMax LMS-UNI-MAX GREEN User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: LMS-UNI-ESSENTIAL SERIES

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Optik Lasermax LMS-UNI-MAX GREEN